Tips on How to Get the Best Engineered Flooring in Melbourne

We are over and over again asked the same questions time and time again about basic concerns by potential clients who are interested on which type of best wooden flooring to use for their home, shop or commercial premises. In our case we will deal with Engineered Flooring in Melbourne but the same principles apply to all the timbers and different species of wooden flooring. It is so worth while doing your home work on this subject before you pay for your flooring.

Just to pay more certainly does not mean that you get a better product and in many cases the smaller family run companies can give you better advice and often give you a keener price due to the fact that they have often lower running costs. So do shop around and certainly do not look completely with the top named companies that you find time and time again on the web as their staffs main aim will be to sell and not necessarily give you the best advice for your situation.

The main variety of flooring that we are going to take a look at today is Engineered Flooring in Melbourne. Engineered flooring has stood the pace of time for many years and has surely still got a firm place inside the industry today. We certainly have sold solid oak flooring for over 35 years and still do. But our engineered flooring in this present day far outsells our solid wood.

Most of the engineered flooring is given a tongue along with a groove all around the board so that it just slots together. We nowadays here the word ‘were layer’. This really is simply the thickness of Engineered from the top of the tongue to the top surface belonging to the board. This is important if maybe in years into the future you decide to re-sand your floor or refurbish the top layer. We would always advice that ‘6 mm’ would be a good thickness to always aim for. Solid flooring, or in our case Engineered Flooring in Melbourne is really a total natural product so will move, that is, shrink and swell over the width of each and every board.

Moisture humidity or damp are the major factors to cause it to swell or extreme dryness and heat can cause it to shrink. In our climate we might have both of these factors. It is, therefore, essential to permit that your overall width of floor may swell & shrink. If previsions have not put in place permitting for this a disaster is likely to occur with the flooring could start buckling up in the centre of your respective room as its overall widths increases as each board swells. A gap between the walls should always be built in place to permit the movement of Engineered Flooring in Melbourne.

Before you pay for an engineered wood flooring have a read of this blog. It just might save you a lot of money and a lot of hassle. It is so important these days to purchase from a company like us that actually cares about the end result of your flooring and the finished effect and not just for the company selling the product to gain a sale. Take time to read the article and then visit our web site to learn more. Give us a call on the phone to discuss all your personal needs for Engineered Flooring in Melbourne.

We have a wealth of knowledge that they seem happy to share with anyone who is interested in the world of engineered flooring. It is refreshing to find a company that is still willing to give as much time to clients as they do just to make sure they end up with the right product. For carrying out Engineered Flooring in Melbourne, call Profile Timber now!